Helpdesk

Could you update the user manual in order to add the pins used by the strompi 3 on the RPI 40pin header


I see that this information was provided in another thread from ozbyte, but this information should be provided in the user manual in §9.3 Raspberry PI pin-layout to help users avoiding any conflict with other HAT


best regards

Domv31

25.03.25 23:29

Hello Domv31, 
thanks for the feedback. We will add this point to the next update of the manual. The StromPi uses GPIOs 14 and 15 in normal mode and GPIO 21 in serial-less mode. All other pins can be used freely at any time.


Best regards
Tim (Joy-IT)

Tim

28.03.25 09:35