Helpdesk

There is a reset jumper on Strompi3. How can this one be used?

Hi ibot,
as for cases like you’ve pointed out, we’ve included the serialless-Mode in the StromPi3 v1.4 Firmware, where you can add this function to one of the Pins on the StromPi3, so it can behave like its predecessor StromPi2.
You can find more informations about the Firmware Upgrades here:

• https://strompi.joy-it.net/wp-content/uploads/2018/11/StromPi3_Firmware_v1.4.zip


• https://strompi.joy-it.net/wp-content/uploads/2018/11/FirmwareChangelog_15112018.pdf


• https://github.com/joy-it/strompi3/tree/master/SerialLess-Mode

Best Regards,
Nils